> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://knowledge.flightcast.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to Set Up Ads in Flightcast

## How to Set Up Ads in Flightcast

 

**1. Add ad slots to an episode first** [0:00](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=0)

![generated-image-at-00:00:00](https://loom.com/i/f477b5a1ef6942c389767a21d8fede45?workflows_screenshot=true)

* Before creating any campaigns, open an episode and add **ad slots**.
* Go to an episode, click **Ad slots** at the top, then click **Add slot** on the right.
* Choose the slot type: 
* **Pre-roll** = plays before the episode
* **Mid-roll** = plays during the episode
* **Post-roll** = plays after the episode
* Choose what the slot can contain: 
* **Dynamic ads** = your campaign ads, usually sponsor reads you pre-recorded
* **Programmatic ads** = ads Flightcast fills automatically, similar to AdSense
* **Both** = allow either type

 

**2. Create a campaign from the Ads page** [0:57](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=57)

![generated-image-at-00:00:57](https://loom.com/i/26cf37380784403c97fe09cf8d627e6f?workflows_screenshot=true)

* Once an ad slot exists, go to **Ads** in the left sidebar.
* Click **Create** in the top right.
* Enter a **campaign name**.
* Create a matching **advertiser** record.
* Pick the advertiser’s **category**.
* Set the campaign’s delivery goal: 
* number of **downloads/impressions** to deliver
* a **deadline date** by which they must be delivered
* Click **Create campaign**

 

**3. Configure campaign targeting and delivery settings** [1:44](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=104)

* New campaigns start in **Draft** status.
* In the campaign settings, configure: 
* **Target downloads / impressions**
* **Priority**
* **Geo targeting** (for example, only the **United States**)
* **Device targeting** (for example, only **iPhones**)
* **Podcast targeting** if you have multiple shows
* **Episode exclusions** if you want to avoid specific episodes
* Save your changes when finished

 

**4. Upload the ad creative** [2:38](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=158)

![generated-image-at-00:02:38](https://loom.com/i/bdf7d98813954f5787ba7adcf0e5067b?workflows_screenshot=true)

* In the right-side ad section, click **Create your first ad**.
* Give the ad a **title**.
* Choose the ad placement type: 
* **Pre-roll**
* **Mid-roll**
* **Post-roll**
* Note: campaigns can currently have **one ad of each type**.
* Optionally add **pixel tracking URLs**.
* Choose whether the ad is: 
* **Audio** — plays everywhere audio is supported
* **Video** — only shows in video-supported players, with still-image ad behavior in some players
* Upload the ad file (for example, an **MP3** for audio)
* If needed, create different versions for different regions or targeting needs

 

**5. Activate the campaign so it can run** [3:47](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=227)

![generated-image-at-00:03:47](https://loom.com/i/6efabb1f9c0245b7957f07a2133764f3?workflows_screenshot=true)

* After the campaign and ad are ready, it is still in **Draft**.
* Open the basic campaign info.
* Change the status from **Draft** to **Active**.
* Click **Save changes**.
* Once active, the campaign can begin serving into matching ad slots

 

**6. Understand pacing so delivery stays on schedule** [4:03](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=243)

![generated-image-at-00:04:03](https://loom.com/i/c3f68f3654c14ad9a57eca27a31251d9?workflows_screenshot=true)

* Flightcast campaigns try to stay **on pace**.
* Pacing means delivering impressions evenly over time so the campaign hits its goal by the deadline.
* Example: 
* 50,000 impressions due by July 31
* Flightcast spreads delivery across the time period instead of serving everything immediately
* This prevents one campaign from using up all impressions too quickly

 

**7. Set default ad slots for new episodes if you want automation** [4:36](https://loom.com/share/15bff5c4194040d685275af19c0ad760?t=276)

![generated-image-at-00:04:36](https://loom.com/i/5d75b48e99d64350ae82f40b4c273444?workflows_screenshot=true)

* If you do not want to add ad slots manually to every episode, set **default ad slots** at the podcast level.
* Go to **Podcast** in the left sidebar.
* Scroll down to **Default ad slots** and edit them.
* You can enable default: 
* **Pre-roll**
* **Post-roll**
* Choose how many slots to add and whether they are **dynamic** or **programmatic**.
* From then on, every new episode will inherit those default ad slots

### 